Table of Contents
Advertisement
uuIf a Tyre Goes FlatuChanging a Flat Tyre
■
How to Set Up the Jack
Jacking Points
Jacking Point
536
1. Place the jack under the jacking point
closest to the tyre to be changed.
2. Turn the end bracket clockwise (as shown
in the image) until the top of the jack
contacts the jacking point.
u
Make sure that the jacking point tab is
resting in the jack notch.
1How to Set Up the Jack
WARNING
3
The vehicle can easily roll off the jack,
seriously injuring anyone underneath.
Follow the directions for changing a tyre
exactly, and no person should place any
portion of their body under a vehicle that is
supported by a jack.
WARNING: The jack shall be placed on a flat and
stable surface on the same level as the vehicle is
parked.
Australian and New Zealand models
The jack that came with your vehicle has the
following label.
1. See Owner's Manual.
2. Never get under vehicle when supported by jack.
3. Place jack underneath reinforced area.
Advertisement
Chapters
Table of Contents
