uuOperating the Switches Around the Steering WheeluBrightness Control
Brightness Control
■
Adjusting the Instrument Panel Brightness
Right-hand drive models
Control
Button
Left-hand drive models
Control Dial
* Not available on all models
188
When the power mode is in ON, you can use
the brightness control button
instrument panel brightness.
Right-hand drive models
Brighten: Press the
+ button.
(
Dim: Press the
(
- button.
Left-hand drive models
Brighten: Turn the dial up.
Dim: Turn the dial down.
You will hear a beeper when the brightness
reaches minimum or maximum. Several
seconds after you have adjusted the
brightness, you will be returned to the
previous screen.
■
Brightness level indicator
The brightness level is shown on the driver
information interface while you are adjusting
it.
1Brightness Control
The brightness of the instrument panel will be
reduced when the following conditions:
*
/dial
*
to adjust
•
The power mode is in ON.
•
The light switch is in any position other than off
and it is dark outside.
Right-hand drive models
To cancel the reduced instrument panel brightness
when the exterior lights are on, press the
until the brightness display is up to max, the beeper
sounds.
Left-hand drive models
To cancels the reduced instrument panel brightness
when the exterior lights are on, turn the dial up until
the brightness display is up to max, the beeper
sounds.
The brightness can be set differently for when the
exterior lights are on, and when they are off.
button
(
+