Honda Accord 2020 Manual page 186

■
How to Turn Off the Auto High-Beam
You can turn the auto high-beam system off. If you want to turn the system off or
on, set the power mode to ON, then carry out the following procedures while the
vehicle is stationary.
AUTO Position
To turn the system off:
With the light switch is in AUTO, pull the lever
towards you and hold it for at least 40 seconds.
After the auto high-beam indicator light blinks
twice, release the lever.
To turn the system on:
With the light switch is in AUTO, pull the lever
towards you and hold it for at least 30 seconds.
After the auto high-beam indicator light blinks
once, release the lever.
uuOperating the Switches Around the Steering WheeluAuto High-Beam
1How to Turn Off the Auto High-Beam
If you turn the auto high-beam system off, the system
does not operate until you turn the system on.
Park in a safe place before turning the system off or
on.
*
185