Locking And Unlocking The Doors; Key Type And Functions - Honda Accord 2020 Manual

Locking and Unlocking the Doors

Key Type and Functions

This vehicle comes with the following key:
■
Built-in Key
Release Knob
Built-in Key
Use the keys to start and stop the engine, and
to lock and unlock all the doors, boot, and
fuel fill door.
You can also use the remote transmitter or
keyless access system to lock and unlock all
the doors, fuel fill door and to open the boot.
The built-in key can be used to lock/unlock the
doors when the keyless remote battery
becomes weak and the power door lock/
unlock operation is disabled.
To remove the built-in key, slide the release
knob and then pull out the key. To reinstall
the built-in key, push the built-in key into the
keyless remote until it clicks.
1Key Type and Functions
All the keys have an immobilizer system. The
immobilizer system helps to protect against vehicle
theft.
2 Immobilizer System P. 166
Follow the advice below to prevent damage to the
keys:
•
Do not leave the keys in direct sunlight, or in
locations with high temperature or high humidity.
•
Do not drop the keys or set heavy objects on them.
•
Keep the keys away from liquids, dust and sand.
•
Do not take the keys apart except for replacing the
battery.
If the circuits in the keys are damaged, the engine
may not start, and the remote transmitter may not
work.
If the keys do not work properly, have them
inspected by a dealer.
You can remotely start the engine using the remote
engine start.
2 Remote Engine Start P. 333
Continued 151