Furuno FSV-30 Operator's Manual page 19

3. Use the trackball to select DISPLAY SETTING and press the [MENU] key.
DISPLAY SETTING
DISPLAY MODE...
MODE SELECTION
H2 DISPLAY
TRANSPONDER*
PRESENTATION MODE : HEAD UP
TM DISPLAY RANGE
BEARING REF
TILT LEVER
H-SLICE WIDTH
H-SLICE PICT ADVC
NET COURSE MARK
MANUAL DEGAUSS
AUTO DEGAUSS
DIMMER
KEY BEEP VOLUME
4. Select DIMMER with the trackball and press the [MENU] key to open the
dialog box.
QUIT
CANCEL
5. Select (raise setting) or
6. Use the [MENU] key to change the setting.
7. Select QUIT with the trackball and press the [MENU] key.
8. Select QUIT at the top of the menu screen and press the [MENU] key to
close all menus.
MENU QUIT
OTHERS QUIT
QUIT
: MODE KEY
: PORTRAIT
: OFF
: 1.6R
: SHIP HEADING
: TILT
: 16
: KP SYNC
: ENTER
: EXECUTE
: INT SENSOR
: 10
: 5
DISPLAY SETTING menu
DIALOG BOX FOR SETTING NUMERIC DATA
Select (raise setting) or
the trackball and press [MENU] key to change
setting. Select QUIT to finish; CANCEL to cancel
operation.
Dialog box for setting numeric value
(lower setting) with the trackball.
1. OPERATIONAL OVERVIEW
*: Transponder is
under development.
(lower setting) with
1-5