Menu Overview - Furuno FSV-30 Operator's Manual

1.8

Menu Overview

Most operations are carried out through the menu. This section provides basic
menu operating information.
Note: The example screens shown in this manual may not match the screens
you see on your display. The screen you see depends on your system
configuration and equipment settings.
1. Press the [MENU] key to open the main menu.
USER MENU
This menu may be
programmed as
desired (max. 10
items). Shown here
are the items of the
default user menu.
Select menu with trackball,
and then press [MENU] key
to display. (Ellipsis mark
(...) indicates a menu.)
2. Select menu desired with the trackball and press the [MENU] key. (For
example, select the H-SCAN SETTING menu.)
MENU TITLE
Select QUIT with trackball
and press the [MENU]
key to close menu
currently open.
Menu items and
current settings
MENU
TX PULSE LENGTH-H : 9
TX POWER-H : 9
TVG-NEAR-H : 0
TVG-MEDIUM-H : 0
TVG-FAR-H : 0
AGC-H : 0
2ND AGC-H : 0
ECHO AVERAGE-H : 0
COLOR-H : COLOR 1
COLOR RESPONSE-H : COLOR CURVE 3
H-SCAN SETTING...
V-SCAN SETTING...
OTHERS...
Main Menu
MENU
H-SCAN SETTING
TX INTERVAL : 9
TX PULSE LENGTH : 9
TX POWER : 9
TVG-NEAR : 0
TVG-MEDIUM : 0
TVG-FAR : 0
NOISE LIMITER : 2
REVERBERATION : 0
AGC : 0
2ND AGC : 0
NEAR AGC : 0
ECHO AVERAGE : 0
INT REJECT : 0
FREQ SHIFT : 0
FREQ/BEARING SET : 16
OTHERS...
H-SCAN SETTING menu
1. OPERATIONAL OVERVIEW
QUIT Select QUIT with trackball
and then press [MENU] key
to close menu.
Choose QUIT to close
QUIT
all menus.
QUIT
Pointer shows current
selection.
1-13