Furuno FSV-30 Operator's Manual page 4

CAUTION
Maximum speed while the transducer is
projected and being raised or lowered
is as below, to prevent damage to the
transducer.
Projected
1200 mm stroke Max. 18 kt Max. 15 kt
1600 mm stroke Max. 15 kt Max. 12 kt
A warning label is attached to the units
of the system. Do not remove the label.
If the label is missing or damaged,
contact a FURUNO agent or dealer.
To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.
Raising/
Lowering
ii
Name: Warning Label (1)
WARNING
Type: 86-003-1011
Code No.: 100-236-231
Display unit
Processor unit
Name: Warning Label
DANGER
Type:10-071-5313
Keep fingers away
from gears.
Code No.: 100-291-160
Shaft may cause
injury.
Keep away froom
Hull unit
DANGER Name: Warning Label
DANGER
Electrical shock hazard.
Type:10-079-6144
Do not remove cover.
No user-serviceable parts inside.
Code No.: 100-310-880
Turn off power before servicing.
And wait until charge lamp (green)
goes off and then remove cover.
Transceiver unit