Receiving An Individual Call - Furuno FS-1570 Operator's Manual

5 CALLING, RECEIVING

5.2.2 Receiving an individual call

When own ship receives an individual call, acknowledgement is automatically or manually
sent depending on the comply-type setting (see paragraph 7.2). The relationship between
comply type and automatic/manual acknowledge is as shown in the table below.
Comply type
Setting of
[5/ACQ /SQ] key
AUTO ACK
MANUAL ACK
Note: The handset must be on hook to enable automatic acknowledge.
Sending automatic acknowledge (ACK BQ) with comply type "ABLE"
1. When an individual call is received and the automatic acknowledge feature is active
(AUTO ACK) and the comply type is "ABLE," the display shown below appears. This
display indicates that the auto acknowledge (ACK BQ) call is being sent.
Able acknowledge
call in progress!
TO SHIP:
ROUTINE
TELEPHONE
DSC FREQ :
TIME TO GO:
2. It takes about seven seconds to transmit the call, after which the audio alarm sounds
and the following message appears.
Able acknowledge
call transmitted.
TO SHIP:
ROUTINE
TELEPHONE
3. Press the [CANCEL] key to silence the alarm. The following display appears.
Xmitted message
*
MAR-23-2002-23:01
ABLE ACKNOWLEDGEMENT
TO SHIP:
ROUTINE
TELEPHONE
!
RE-SEND
4. Press the [CANCEL] key. You can now communicate with the party, over the
radiotelephone frequency specified or by the NBDP terminal unit.
5-10
Can send acknowledge
automatically
Can send acknowledge
manually
123456789
CH 201
2177.0 KHZ
6S
123456789
CH 201
STOP ALARM
*
123456789
CH 201
"
ALL VIEW
ABLE
Can send UNABLE
automatically.
Can send UNABLE manually.
UNABLE