Diagnostics - Furuno FS-1570 Operator's Manual

12 MAINTENANCE & TROUBLESHOOTING

12.9.4 Diagnostics

General diagnostics
1. Press the function key [F6] to display the System menu.
Setup
Slave Delay
TX/RX MSG Save
Edit Before sending
Time System
Time & Date
Display Mode*
Self Test
* = Window Color shown on IB-583.
2. Choose Change from Setup.
3. Choose Self Test (at the bottom of the screen).
4. Press the [Enter] key. The results of the self test are displayed a short time later.
Terminal Unit Test : ver. X.XX
Main Unit Test
Modem Unit Test
Radio Unit Test
DSC Unit Test
Printer Unit Test*2:
X.XX = Version No.
*1: Or FS2570
*2: "NG" and "Printer not ready" when printer is off or
is abnormal.
The test results are shown as OK or NG (No Good). For any NG, try the self test again. If it
appears again, call for service. When the test is completed, the message "Selftest
Completed. Press any key to escape." appears.
12-10
System
Lock Change Default
8 msec (0- 50 msec)
OFF O N
OFF O N
OFF UTC SMT JST
2002/10/16 10:00:00
Normal Reverse
System menu
Selftest
: ver. X.XX
: ver. X.XX
: ID FS1570*1
: ID FS1570*1
Self test results
:OK IB-58X
MAIN Board
:OK
NBDP Modem
:OK
:OK
:OK
:OK