Receiving A Geographical Area Call - Furuno FS-1570 Operator's Manual

5 CALLING, RECEIVING

5.4.2 Receiving a geographical area call

1. The alarm sounds and the display shows "Geographical area call received" when a
geographical area call is received.
Geographical area
call received.
FROM SHIP:
ROUTINE
TELEPHONE
STOP ALARM
2. Press the [CANCEL] key to silence the alarm. The display changes as below.
Received message
*
MAR-23-2002-23:59
GEOGRAPHICAL AREA
FROM SHIP :
ROUTINE
TELEPHONE
GO TO ALL VIEW
3. Press the [CANCEL] key to go to the radiotelephone screen. Watch on the working
frequency specified in the geographic area call.
Receiving message by NBDP Terminal Unit
After receiving a geographic call, do the following to watch by NBDP Terminal Unit:
1. The control unit's display shows "OCCUPIED" and the TX and RX frequencies.
2. The message from the sending station appears on your NBDP Terminal Unit.
5-22
123456789
TX: 2164.0KHZ
RX: 2164.0KHZ
*
ECC: OK
123456789
TX: 2164.0KHZ
RX: 2164.0KHZ