Preparing Test Calls - Furuno FS-1570 Operator's Manual

6 PREPARING TX CALLS
10. Rotate the [ENTER] knob to choose appropriate DSC band and then push the
[ENTER] knob. Choose appropriate DSC frequency and then push the [ENTER] knob.
11. Follow "How to Enter File Name and Number" on page 6-3 to enter file name and
number.

6.5 Preparing Test Calls

1. At the DSC standby screen, press the [#/SETUP] key to open the Setup menu.
2. Rotate the [ENTER] knob to choose MESSAGE and then push the [ENTER] knob.
3. Push the [ENTER] knob to open the CALL TYPE menu.
Message file entry
*
INDIVIDUAL
CALL TYPE : INDIVIDUAL
PSTN CALL
STATION ID : ---------
GROUP CALL
COM. TYPE : TELEPHONE
AREA CALL
COM. FREQ : NO INFO
TEST CALL
DSC FREQ : 2M-INTL
4. Rotate the [ENTER] knob to choose TEST CALL and then push the [ENTER] knob.
5. Push the [ENTER] knob to open the COAST ID entry window.
Message file entry
*
CALL TYPE : TEST
000000000
COAST ID
DSC FREQ :
6. Enter coast ID where to send the test message and then push the [ENTER] knob.
7. Push the [ENTER] knob to open the DSC FREQ menu.
Message file entry
*
2187.5
CALL TYPE : Test
4207.5
COAST ID : 001234567
6312.0
: Safety
8414.5
12577.0 :
16804.5
DSC FREQ
8. Rotate the [ENTER] knob to choose appropriate DSC frequency and then push the
[ENTER] knob.
9. Follow "How to Enter File Name and Number" on page 6-3 to enter file name and
number.
6-8
2187.5 KHZ
kHz
KHZ
VIEW