Description Of Equipment; Terminal Unit - Furuno FS-1570 Operator's Manual

8 NBDP SYSTEM OVERVIEW

8.2 Description of Equipment

8.2.1 Terminal unit

The terminal unit is a visual display incorporating a floppy disk drive, which provides for
storage of files on floppy disks. Two models are available, IB-581 (monochrome) and IB-583
(color). Controls for power and adjustment of display brilliance and contrast are provided on
the front panel of the IB-581. To adjust the brilliance on the IB-583, press [Alt] while
pressing [F6] to lower the brilliance; [F7] to raise it. (The IB-583 does not have a control for
adjustment of contrast.) Eight levels of brilliance are available.
When the terminal unit is turned on, the communication status display, shown below,
appears. This is where all phases of telex communications begin.
1:File 2:Edit 3:Operate 4:Window 5:Station 6:System 7:WRU 8:HR 9:Over 10:Break
Station Name :
Frequency (T/R) :
Comm Status :
Sending Volume :
Features of the IB-583
The IB-583 is fitted with both English and Russian interface. Choose desired interface as
below:
English: Turn on the IB-583 while pressing the [E] key.
Russian: Turn on the IB-583 while pressing the [R] key.
The IB-583 has a battery (type CR2450-F2ST2L, code no. 000-144-941) on its TERM/CPU
Board (16P0209) and its life is about six years. When the voltage of the battery is low, the
time will be slow. When this occurs, contact your dealer about replacement of the battery.
8-2
/ (kHz)
Connect Send Lock Error
(%) ARQ Error : 0
Communication status display
2002-10-15 2:26:45 UTC
Comm Mode :
ARQ Time : 0(sec)
Caps-Eng