Deleting User Channels; Fax Enable/Disable - Furuno FS-1570 Operator's Manual

2 SSB RADIOTELEPHONE

2.6.2 Deleting user channels

Deleting individual user channels
1. At the radiotelephone screen, press the [#/SETUP] key.
2. Rotate the [ENTER] knob to choose USER CH and then push the [ENTER] knob.
3. Rotate the [ENTER] knob to choose ENTRY and then push the [ENTER] knob.
4. Push the [ENTER] knob, rotate the [ENTER] knob to choose CH and then push the
[ENTER] knob.
5. Enter channel number to process and then push the [ENTER] knob.
6. Tx and Rx frequencies are shown as "0.0 kHz"; push the [ENTER] knob to delete
channel.
7. Press the [CANCEL] key twice to return to the radiotelephone screen.
Deleting all user channels
1. At the radiotelephone screen, press the [#/SETUP] key.
2. Rotate the [ENTER] knob to choose USER CH and then push the [ENTER] knob.
3. Rotate the [ENTER] knob to choose ERASE and then push the [ENTER] knob.
4. Rotate the [ENTER] knob to choose YES and then push the [ENTER] knob.
5. Press the [CANCEL] key to return to the radiotelephone screen.

2.7 FAX Enable/Disable

You may enable or disable FAX use as follows:
1. At the radiotelephone screen, press the [#/SETUP] key to open the Setup menu.
2. Rotate the [ENTER] knob to choose FAX RX ENABLE and then push the [ENTER]
knob.
3. Rotate the [ENTER] knob to choose ON or OFF as appropriate and then push the
[ENTER] key.
SSB
MODE: SSB SIMP
CH: 800
TLX
FAX
TX: 2182.0
AM
RX: 2182.00
AGC : FAST
SEN
VOL
4. Press the [CANCEL] key to close the menu.
2-12
HIGH
KHZ
KHZ
S
IA 0.0A