Daikin Split Comfora R32 Service Manual page 99

To close the front panel
To remove the front panel
ATXP20~35 + FTXP20~71 + ARXP20~35 + RXP20~71
Split Comfora R32
ESIE18-01C – 2020.07
1 Install all filters back in their original positions.
2 Gently press the front panel at both sides and at the center until it clicks.
1 Hold the front panel by the panel tabs on both sides and open it.
a Panel tabs
a Panel tabs
2 Remove the front panel by sliding it to the left or the right and pulling it
toward you.
Result: The front panel shaft on 1 side will be disconnected.
3 Disconnect the front panel shaft on the other side in the same manner.
a
2 Components
|
a
a
Service manual
99