Daikin Split Comfora R32 Service Manual page 105

To install the swing flap motor
ATXP20~35 + FTXP20~71 + ARXP20~35 + RXP20~71
Split Comfora R32
ESIE18-01C – 2020.07
b
a Cover
b Screw
c Swing flap motor
2 Disconnect the connector from the swing flap motor.
3 Remove the screw from the swing flap motor.
4 Remove the swing flap motor from the swing flap.
5 To install the swing flap motor, see
1 Install the swing flap motor in the correct location on the swing flap.
b
a Cover
b Screw
c Swing flap motor
2 Install and tighten the screw to fix the swing flap motor.
3 Connect the connector to the swing flap motor.
4 Install the cover.
Is the problem solved?
Yes
No
c a
"2.12.2 Repair
c a
Action
No further actions required.
Return to the troubleshooting of the
specific error and continue with the
next procedure.
2 Components
|
4
procedures" [ 104].
Service manual
105