Daikin Split Comfora R32 Service Manual page 52

2 | Components
To install the compressor
Service manual
52
a
c
a Nut
b Compressor
c Damper
9 Remove the 3 dampers from the compressor.
INFORMATION
The compressor dampers may look different.
10 Remove the bushings and keep them for re-use.
11 To install the compressor, see
1 Check the state of the dampers. Replace if worn.
2 Install the 3 dampers in the correct location on the unit.
a
c
a Nut
b Compressor
c Damper
INFORMATION
The compressor dampers may look different.
3 Remove the caps from the compression pipe and suction pipe.
CAUTION
The oil in the compressor is hygroscopic. Therefore remove the caps from the
compressor pipes as late as possible.
b
a
c
a
c
"2.2.2 Repair procedures" [
b
a
c
a
c
ATXP20~35 + FTXP20~71 + ARXP20~35 + RXP20~71
4
50].
Split Comfora R32
ESIE18-01C – 2020.07