Daikin Split Comfora R32 Service Manual page 108

2 | Components
To install the swing raster motor
Service manual
108
a
c
a Swing raster shaft
b Swing raster motor rod
c Swing raster motor assembly
8 Remove the swing raster motor assembly from the indoor unit.
9 Remove the 2 screws that fix the swing raster motor to the bracket.
10 Disconnect the rod from the swing raster motor and remove the motor. Keep
the rod and bracket for reuse.
11 To install the swing raster motor, see
1 Install the swing raster motor on the bracket using the 2 screws. Do NOT yet
tighten the screws.
2 Install the rod on swing raster motor shaft.
3 Bring the swing raster motor assembly to the correct position in the indoor
unit and guide the swing raster shaft in the swing raster motor assembly.
a
c
a Swing raster shaft
b Swing raster motor rod
c Swing raster motor assembly
4 Connect the swing raster motor rod to the swing raster shaft using soft tools.
b
"2.13.2 Repair
b
4
procedures" [ 106].
ATXP20~35 + FTXP20~71 + ARXP20~35 + RXP20~71
Split Comfora R32
ESIE18-01C – 2020.07