Manual Sewing Mode - Pfaff 3519-4/01 Instruction Manual

Threading aid
This function activates the threading aid, see e.g. Chapter 9.01 Inserting the needle.
Stacker up/down
This function is used to raise or lower the stacker.
Stop
(This function only appears during the sewing cycle.)
This function is used to stop the sewing cycle.
Start
(This function only appears if the sewing cycle was stopped.)
This function is used to start the sewing cycle.
Basic position
This function is used to bring the machine into the basic position.
10

Manual sewing mode

.03
●
Switch on the machine.
●
Call up the manual sewing mode..
●
Switch on the suction air of the positioning tube or the loading table, see Chapter
7.06 Pedal.
●
Insert the workpiece, see Chapter
Description of the functions on the display
Menu for entering the program number
This functions opens the menu for entering the program number, see Chapter 9.07 Selec-
ting the program number.
Input menu
This function is used to call up the input mode, see Chapter 11 Input.
10.01 Inserting the workpiece.
Sewing
41