10
Sewing – automatic mode
.01
Turn on the machine at the main switch and wait for it to be ready for operation.
Press the presser foot key and raise the presser foot.
Lay the top edge of the pocket blank at the stop.
Slide the pocket blank to the left under the Plexiglas cover.
Light barrier detects the start of the pocket blank.
Feed band takes hold of the pocket blank.
Feed band moves the pocket blank to the left into the pleating attachment.
Pleating attachment folds over the top edge.
Feed band moves the folded pocket blank into the sewing position.
Top edge seam is sewn.
Pocket blank is transported out of the sewing area.
Fig. 10 - 02
The following work steps assume that the sewing preparations listed in the
"Set-up" chapter have been carried out thoroughly and the machine has been
programmed according to the order.
The following keys are switched on in automatic mode, see Fig. 10-02
3500
1
3,5
2000
F1
F2
Input
F4
0
00
0
00
F3
27