Creating / Altering Seam Programs - Pfaff 3519-4/01 Instruction Manual

Input
11

Creating / altering seam programs

.02
When creating or altering seam programs, a basic distinction is made between 3 different
seam types:
●
●
●
start condensed stitches or
Enter the seam program input function by selecting the desired seam type.
●
●
●
46
Single-pointed darts
L3 = L4; Program numbers 0 – 199
Double-pointed darts
L3 < 4.5 mm; not to be cut; Program numbers 200 - 299
Tapered darts
L3 < L4; Program numbers 300 - 399
table edge
waist length L2
start backtacks
Fig. 11 - 01
Switch on the machine.
Call up the input mode.
Call up the seam program input function.
uncut material fold length L5
dart length L1
outer material edge
end condensed stitches
L1
CORR