Sewing; Manual Sewing - Pfaff 1571 Instruction Manual

Sewing

10
In sewing mode all settings relevant for the sewing operation are shown in the display.
Functions can be switched on or off by pressing the key, values for start and end backtacks
or placed stitch can be altered directly.
In this mode a difference is made between manual sewing and programmed sewing.
The "PM" button is used to switch between manual sewing (LED off) and programmed
sewing (LED on).
fixed programs, which are programmed in machine memory, are stored under the pro-
gram numbers 1-2. The program numbers 3-99 can be assigned with freely programmable
seams.
10

Manual sewing

.01
After the machine has been switched on and the selection of manual sewing pressed by the
PM key, the display appears for entering the stitch length, see also Chapter 9.08 Entering
the stitch length.
If the backtack function is switched on, the display appears for entering the backtack values,
see also Chapter 9.09 Entering the start and end backtacks.
To switch between the displays, press the scrolling key.
Further functions in manual sewing, see also Chapter 7.11.03 Function keys :
Sewing is carried out using the pedal function, see also Chapter 7.04 Pedal.
2.5 2.5
A B C D
3 3 3 3
Backtack suppression
Start backtack on/off
End backtack on/off
Raise needle position on/off
Raise roller-presser on/off
Raise roller-presser after thread trim-
ming on/off
Thread trimming on/off
Sewing
49