Knife Position - Pfaff 3519-4/01 Instruction Manual

Adjustment
13

Knife position

.06.04
●
●
●
●
●
80
Requirement
1. There must be a distance of
needle.
2. The right edge of the knife
catcher (see arrow).
3
4 mm
Fig. 13 - 13
Bring the needle bar to BDC.
Slide knife 1 under the locking tab and align according to requirement 1.
Tighten screw 2 lightly.
Adjust thread catcher carrier
positioned just in front of the cutting edge of the knife.
Align knife 1 according to requirement 2 and tighten screw 2.
4 mm between the cutting edge of the knife and the
1 must not extend beyond the right edge of the thread
1
3 by hand until the wedge point in the thread catcher is
2
1