Table of Contents
Advertisement
Installation and commissioning
8
Commissioning
.02
●
●
●
24
Before commissioning the machine, clean it thoroughly and lubricate it, or fi ll in oil, see
Chapter 12 Care and Maintenance!
Check the machine, in particular the electric cables and the pneumatic connection tubes,
for any damage.
Have a qualifi ed person check whether the motor can be driven with the existing power
voltage.
If there are any differences, the machine must defi nitely not be operated!
The machine must only be connected to a suitably earthed socket!
Fig. 8 - 06
●
Connect the machine to the compressed
air system and push up sliding seal 1.
●
There must be a supply pressure of
bar. If necessary, set this value, see
Chapter 12.06 Checking / adjusting the
air pressure.
1
6
Advertisement
Table of Contents
