Bowflex Ultimate 2 Assembly Instructions Manual page 43

Installing Your Bowflex Ultimate
Install Squat Attachment
(Continued from page 32)
6. Extend the Cable from the Chest Bar Sliding Pulley to
the Hooks on both sides of the Squat Attachment.
(See Figure E)
Operating Squat Attachment
1. Unlock Seat T Handle. (See Figure A)
2. Stand under Squat Attachment with Shoulder Pads
resting on shoulders.
3. Pull the Release Handle out and rotate it forward
to allow the Squat Attachment slide freely on the
Seat Rail. (See Figure F)
Note: The Squat Attachment will not slide
downward until you push upward to
release the safety lock.
2 Squat Attachment
®
Sliding Pulley
Hook
Cable
Chest Bar
Figure E
42