Bowflex Ultimate 2 Assembly Instructions Manual page 26

25
STEP 10
Parts:
• Seat Rail Assembly (Box 5)
• Base Assembly
Tool:
• Hex Key (7/32")
• Wrench (9/16") - or Adjustable Wrench
10-1 Align holes on Seat Rail with holes
in Rod Box Assembly.
10-2 Install and completely tighten the hardware.
Hardware (1:1):
1 Pan Head Allen Bolt (3/8" X 5 1/2")
STEP 11
Parts:
• Chest Bar (Box 4)
• Pulley Sliders (Box 4)
• Washer Plate (Box 4)
Tools:
• Hex Key (5/16")
• Wrench (3/4") - or adjustable wrench
11-1 Align holes in Chest Bar, Washer Plate and Lat Tower
Uprights.
11-2 Install and completely tighten the Chest Bar hardware.
11-3 Slide the Pulley Sliders on (with pulleys facing up and pull
knob facing the seat rail) then install and tighten the
1/4"x1/2" Stop Screws.
Hardware (1:1):
2 Nylock Nut (1/2")
Assembling Your Bowflex Ultimate
4 Washers (1/2")
2 Pan Head Allen Bolt (1/2" X 6 3/4")
(Rod Pack Not Shown
For Clarity)
Seat Rail Assembly
Pulley Slider
Stop Screw
Pan Head Allen
Washer
Bolt
2 Cap Screw (1./4 x 1/2")
2
®
Hex Nut
Pan Head Allen
Bolt
1 Nylock Nut (3/8") 2 Washers (3/8")
Chest Bar
Washer Plate
(Rod Pack Not Shown
For Clarity)
Rod Box
Assembly
Washer
Hex Nut