Bowflex Ultimate 2 Assembly Instructions Manual page 40

39
Cable Installation STEP 5
Tool:
• Hex Key (7/32")
• Wrench (9/16") - or Adjustable Wrench
a. Observe the Cable routing in Figure A.
b. Unscrew the Nut and pull the Long Screw out just
enough to angle the Pulley Assembly and allow the
Cable to thread between the Rod and the Pulley.
(See Figure B) Leave the Long Screw loose until you
have routed the Cable on the other side of the unit.
Long Screw
Rod
Installing Your Bowflex Ultimate
Figure B
2 Cables
®
Cutaway of
Rod Box
Floating Pulley
Cable
Hex Nut
Washer
Floating Pulley
Figure A