Bowflex Ultimate 2 Assembly Instructions Manual page 18

17
STEP 1
Parts:
• Front Base Platform (Box 3)
• Metal Handle Assembly (Box 3)
Tools:
• Hex Key (7/32")
1-1 Move twist ties and cable ends
up and out of the way.
1-2 Position the Metal Handle Assembly (Label side
up) on the Front Base Platform.
1-3 Install and completely tighten the hardware.
Hardware (1:1):
2 Pan Head Allen Bolt (3/8" X 2 1/4")
Assembling Your Bowflex Ultimate
Cable Ends
Front Base Platform
Metal Handle Assembly
2 Washers (3/8")
2
®
Pan Head Allen Bolt