Fax Setup - Canon MultiPASS C3500 User Manual

Fax Setup

The Desktop Manager contains setup options that define the fax
operation of your MultiPASS C3500 and that affect the general
operation of the Desktop Manager. You can set options that affect
preferences, sending a PC fax, receiving a fax, and using the speed
dial features.
When you first install the Desktop Manager, setup options are set to
appropriate default settings. The default settings enable you to begin
using your MultiPASS with the Desktop Manager immediately. However,
you can change option settings as needed.
Because you can make changes to some option settings either on the
MultiPASS unit or in the Desktop Manager, be aware of the following:
Any option setting you make on the MultiPASS unit does not display
in the Desktop Manager Setup Options dialog box.
Any change you make to an option in the Desktop Manager
overrides the corresponding setting you may have made on the
MultiPASS unit itself.
Therefore, before you make changes to these option settings, decide
where you prefer to make your changes—on the MultiPASS unit or in
the Desktop Manager. Establishing a preference for changes will help you
avoid overriding your previous settings.
N
When the MultiPASS is connected to your PC, we recommend that you
use the Fax Setup dialog box in the Desktop Manager. Do not make your
changes using the operator panel of the MultiPASS.
The following instructions summarize the overall procedures for
changing MultiPASS Fax Setup options in the Desktop Manager.
8-2 Setup and Other Utilities in the Desktop Manager Chapter 8