Canon MultiPASS C3500 User Manual page 71

Position the
MultiPASS.
Set the paper
thickness lever.
Chapter 2
Place the MultiPASS near the edge of a table so that the
paper can flow over the edge as it exits the unit.
Make sure the paper rest is extended.
Press the button to move the cartridge
CARTRIDGE
holder to the center of the unit.
Open the printer cover by grasping the document guides
and lifting.
Set the paper thickness lever.
•
Set it to the center if you are using the BC-21e Color
BJ cartridge.
•
Set it to the left if you are using the BC-20 Black
BJ cartridge.
Close the printer cover.
Printing With the MultiPASS C3500
DO NOT TOUCH THE RIBBON CABLE
DO NOT TOUCH THE GUIDE RAIL
DO NOT TOUCH THE ROUND SHAFT
2-37