Canon MultiPASS C3500 User Manual page 269

Message
MEMORY FULL
MEMORY FULL
PLEASE WAIT
nn%
MEMORY USED
NO ANSWER
NO RX PAPER
NO TEL #
NOT AVAILABLE NOW
PHOTO INK USED
PLEASE WAIT
PUT IN CARTRIDGE
Chapter 10
Error Code Cause
#037 The memory of the
MultiPASS is full
because it has received
too many documents,
or a very long or
detailed document.
Memory is full because
you tried to send too
many pages at once,
or a very long or
detailed document.
— The MultiPASS is
sending a fax and its
memory is full.
— Shows the percentage of
memory currently in use. print or send any
#005 The receiving fax
machine does not
answer.
#012 The other party's fax is
out of paper or its
memory is full.
#022 The one-touch or coded
speed dialing number
has not been registered.
#025 In manual sending, you
entered a speed dialing
number that is assigned
to a group.
— The BC-22e Photo BJ
Cartridge is installed
in the MultiPASS.
— The MultiPASS is
warming up.
— The BJ cartridge is
not properly installed.
Action
Print out any documents
that are stored in
memory. Then start the
operation again.
Divide the document
and send each part
separately.
If sending a fax, the
MultiPASS continues to
send the fax as memory
becomes available.
If you need more space,
documents in memory.
Make sure you dialed
the correct number.
Try again later.
Contact the other party
and have them install
paper in their fax.
Register the number
(see page 3-14).
Use regular dialing.
You must change this
cartridge to copy or
receive a fax.
Wait until the date and
Receive Mode appear in
the LCD display, then
begin.
Make sure the BJ
cartridge is installed
correctly and the green
lock lever is down.
Troubleshooting 10-9