Entering A Group/Memory Name - Icom ID-52A Advanced Manual

9
MEMORY OPERATION

Entering a group/memory name

You can assign a name of up to 16 characters to each
channel group (00 ~ 99) and memory channel�
Example: Entering "Calling" as a Memory name to
Channel 01 in Group 00�
[MENU] > MEMORY > Memory CH
1� Push [MENU]�
2� Select "MEMORY�"
3� Select "Memory CH�"
4� Select Group "00�"
5� Select Channel "01�"
L DO NOT push [ENT]�
6� Push [QUICK]�
7� Select "Edit�"
8� Select "NAME�"
9� Enter a name�
L See page iii on how to enter characters�
10� After entering, push [ENT]�
11� Select "<<Overwrite>>�"
12� Select "YES�"
• Beeps sound, then returns to the Memory channel
screen�
TIP: To enter a group name
On the Memory Group list screen, select a group
and push [QUICK], then select "Edit Name�"
• The Group Name edit screen is displayed�
9-11