Automatic Reply Function - Icom ID-52A Advanced Manual

5
D-STAR OPERATION (ADVANCED)

Automatic Reply function

When a call addressed to your call sign is received,
the Automatic Reply function sounds beeps and
automatically replies with your call sign�
(Default: OFF)
Depending on the setting, a recorded message may
be transmitted with the call sign�
NOTE: The Automatic Reply function temporarily
sets the received call sign to "TO" (destination)�
TIP: To record the Auto Reply message
You can record the Auto Reply message� See page
5-25 for details�
([MENU] > RECORD > DV Auto Replay)
[MENU] > SET > DV Set > Auto Reply
1� Push [MENU]�
2� Select "DV Set" in the "SET" menu�
3� Select "Auto Reply�"
4� Select an option�
• ON: Automatically replies with your own
call sign� (No audio reply is sent)
• Voice: Automatically replies with your own
call sign and an Auto Reply message
recorded on the microSD card (up to
10 seconds)�
L If no SD card is inserted, or no message
is recorded, replies with only your own
call sign (No audio reply is sent)�
• Position: Automatically replies with your call
sign and your position data using the
internal GPS receiver�
L When "GPS Select" is set to "OFF" or
"Manual," the internal GPS receiver is
temporarily turned ON�
5� Push [MENU]�
• Returns to the Standby screen, and displays "
L When "ON" or "Voice" is selected, the Automatic
Reply function is automatically turned OFF when you
push [PTT]�
When "Position" is selected, the Automatic Reply
function remains ON, when you push [PTT]�
Example: After receiving a call from "JM1ZLK," beeps
sound, and the transceiver automatically
sends a reply call�
The "TO" setting does not change, but "UR:
JM1ZLK (Caller's call sign)" is displayed�
5-24
�"