Adjusting The Rx Report Setting - Canon MF5750 Facsimile Manual

Adjusting the RX REPORT Setting

The machine can print an RX (reception) report after receiving a document. You can set it to print every
time it receives a document, or only when an error occurs. Alternatively, you can disable printing the
report. By default, the machine is set not to print an RX REPORT.
01/02 2005 17:52 FAX 1234567
Description
OK: Reception successful
NG: Some or no pages received
Number of pages received.
If reception was not complete, it
indicates the number of page being
received when an error occurred.
Reception duration
Reception time
1
Press [Menu].
2
Press [ (-)] or [ (+)] to select <FAX SETTINGS> ➞ press [OK].
3
Press [ (-)] or [ (+)] to select <REPORT SETTINGS> ➞ press [OK].
4
Press [ (-)] or [ (+)] to select <RX REPORT> ➞ press [OK].
5
Press [ (-)] or [ (+)] to select the setting you want ➞ press [OK].
You can select from the following:
- <OUTPUT NO> to disable printing the report
- <PRINT ERROR ONLY> to print a report only when a reception error occurs
- <OUTPUT YES> to print a report every time you receive a document
6
Press [Stop/Reset] to return to the standby display.
CANON
*********************
R X R E P O RT
***
*********************
RECEPTION OK
TX/RX NO 5003
RECIPIENT ADDRESS 905 795 1111
DESTINATION ID
ST. TIME 01/02 17:52
TIME USE 00' 1 4
PGS.
RESULT OK
Transaction number
Senders fax/telephone number
Registered name for speed dial
(not mentioned on the RX report)
***
1
001
6
6-5