Canon MF5750 Facsimile Manual page 30

3
Enter a destination using the numeric keys on your telephone or using a one-touch speed dialing key,
coded speed dialing code, [Redial/Pause], or the numeric keys on the machine.
4
When the recorded message of the information service answers, press [
When [
If your telephone line uses tone dialing, go to the next step.
5
Use the numeric keys on the machine to enter the numbers requested by the information service.
Numbers entered after pressing [
6
If you want to receive faxes, press [Start].
7
Hang up the handset to disconnect the call.
Tone dialing is canceled when you disconnect the call.
NOTE
4
If the offhook alarm starts beeping, make sure that the handset is resting properly on the handset cradle. The
offhook alarm can be turned off. (See <4. OFFHOOK ALARM> of "Menu Descriptions," on p. 8-2.)
4-10
] is pressed, <T> is displayed in the LCD.
] will be dialed using tone dialing.
] to switch to tone dialing.