Preface; How To Use This Manual; Symbols Used In This Manual; Keys Used In This Manual - Canon MF5750 Facsimile Manual

Thank you for purchasing the Canon LaserBase MF5750/MF5770. Please read this manual thoroughly before
operating the machine in order to familiarize yourself with its capabilities, and to make the most of its many
functions. After reading this manual, store it in a safe place for future reference.

How to Use This Manual

Symbols Used in This Manual

The following symbols are used in this manual to explain procedures, restrictions, handling
precautions, and instructions that should be observed for safety.
WARNING
CAUTION
IMPORTANT
NOTE

Keys Used in This Manual

The following symbols and key names are a few examples of how keys to be pressed are expressed in
this manual. The operation panel keys on the machine are indicated within brackets.

Messages Displayed in the LCD

The following are a few examples of how messages in the LCD are expressed in this manual. The
messages are indicated within angle brackets.
•
If <MEMORY FULL> is displayed, the machine cannot scan the documents.
•
<NOT REGISTERED> appears if there are no numbers registered.

Preface

Indicates a warning concerning operations that may lead to death or injury to persons
if not performed correctly. In order to use the machine safely, always pay attention to
these warnings.
Indicates a caution concerning operations that may lead to injury to persons, or
damage to property if not performed correctly. In order to use the machine safely,
always pay attention to these cautions.
Indicates operational requirements and restrictions. Be sure to read these items
carefully in order to operate the machine correctly, and to avoid damage to the
machine.
Indicates a clarification of an operation, or contains additional explanations for a
procedure. Reading these notes is highly recommended.
Press [Start].
Press [Image Quality].
v