Adjusting The Activity Report Setting; Adjusting The Tx Report Setting - Canon MF5750 Facsimile Manual

Adjusting the ACTIVITY REPORT Setting

You can set the machine to turn on or off automatic printing of the ACTIVITY REPORT.
1
Press [Menu].
2
Press [ (-)] or [ (+)] to select <FAX SETTINGS> ➞ press [OK].
3
Press [ (-)] or [ (+)] to select <REPORT SETTINGS> ➞ press [OK].
4
Press [ (-)] or [ (+)] to select <ACTIVITY REPORT> ➞ press [OK].
5
Press [ (-)] or [ (+)] to select the setting you want ➞ press [OK].
You can select from the following:
- <OUTPUT YES> to turn on automatic printing of the ACTIVITY REPORT
- <OUTPUT NO> to turn off automatic printing of the ACTIVITY REPORT
6
Press [Stop/Reset] to return to the standby display.

Adjusting the TX REPORT Setting

The machine can print a TX (transmission) report (TX REPORT or ERROR TX REPORT) after sending
a document. You can set it to print every time it sends a document, or only when an error occurs.
Alternatively, you can disable printing the report. By default, the machine is set to print a TX report only
when an error occurs.
■ TX REPORT
01/02 2005 17:52 FAX 1234567 CANON
*********************
T X R E P O RT
***
*********************
TRANSMISSION OK
TX/RX NO
RECIPIENT ADDRESS
DESTINATION ID
ST. TIME
TIME USE
PAGES SENT
RESULT
***
0004
1 432 2060
01/02 17:52
00' 11
1
OK
6
001
6-3