Canon MF5750 Facsimile Manual page 45

#0003
Cause 1
Remedy
Cause 2
Remedy
Cause 3
Remedy
#0005
Cause 1
Remedy
7
Cause 2
Remedy
#0009
Cause
Remedy
#0012
Cause
Remedy
7-4
A document longer than one foot is being sent from the feeder.
Divide the document into pages and resend from the platen glass.
Data is too large and taking too long to send a document.
Reduce the scan resolution and resend.
It's taking too long to receive a page.
Contact the other party and have them reduce the scan resolution or split the document into
segments and resend.
The other party's fax machine did not respond within 35 seconds.
Send the document again. Contact the other party and have them check their fax machine. If you are
making an overseas call, add pauses to the registered number.
The other party is not using a G3 fax machine.
Check with the other party, and send the document to a G3 fax machine. If the other party does not
have a G3 fax machine, try sending your document using a transmission mode that the other party
supports.
No paper is loaded in the cassette or the cassette is not set properly.
Load paper in the cassette or set the cassette properly.
The other fax machine has run out of paper and its memory is full.
Contact the other party, and tell them to refill their paper cassette.