Canon MF5750 Facsimile Manual page 58

Name
4. TIME OUT
ON
OFF
5. RX SETTINGS
1. ECM RX
ON
OFF
2. FAX/TEL OPT. SET
1. RING START TIME
2. F/T RING TIME
3. F/T SWITCH ACTION
3. INCOMING RING
OFF
ON
RING COUNT
Descriptions
Enables/disables automatic scanning of documents
after the fax number is entered.
Scanning begins automatically in 5 or 10 seconds after
you enter the fax number.
Press [Start] to scan document. Otherwise, AUTO
CLEAR function activates and the LCD returns to
standby display after 1 minute. (See Chapter 10,
"Machine Settings," in the User's Guide.)
Sets the reception functions.
The ECM (Error Correction Mode) reception is turned
on or off.
All receptions are conducted with ECM if the other
party's fax supports ECM.
ECM is turned off.
If you select <FaxTel> as the receive mode, customizes
its settings.
Selects the time the machine takes to check whether a
call is a fax or voice call.
0SEC to 30SEC (8SEC)
Selects the ring length for voice calls.
15SEC to 300SEC (22SEC)
Selects whether the machine switches to receive mode
after the ring time has elapsed, or whether if
disconnects the call.
RECEIVE, DISCONNECT
Sets whether the telephone rings when it receives a
voice call, enabling you to answer the call. This function
is only available when the fax receive mode is set to
<FaxOnly>.
The telephone does not ring when it receives a voice
call.
The telephone rings when it receives a voice call if a
telephone is connected.
Sets the number of incoming rings. The telephone will
be disconnected after the specified times.
1TIMES to 99TIMES (2TIMES)
8
8-5