CDD
USER GUIDE
BADGE ROTATION
The badge can also be removed and rotated. It has mouldings on the mounting spigot to ensure that it can only be repositioned
in one of four positions (90° apart). It is recommended that you change the badge position at the same time as the grille is
removed to rotate the driver. On the back of the grille you will see the badge mounting spigot showing just above the plastic
fitting into which it locates:
Push down on the spigot with your thumb (you may need to use something a little harder such as the handle of a screwdriver)...
...and the badge will pop out of the housing:
It can be rotated 90 or 180° to suit the cabinet deployment and pushed back into place. It is simply held in place through friction
so push it firmly in place to ensure that it doesn't fall out.
CDD User Guide V1.0
16