Cdd Mounting Hardware; Wall And Ceiling Mounting Brackets; Model Cdd5 - Martin Audio CDD Series User Manual

CDD USER GUIDE

CDD MOUNTING HARDWARE

WALL AND CEILING MOUNTING BRACKETS

All CDD Models up to CDD12 may be wall mounted and models up to CDD8 ceiling mounted, using the appropriate optional
bracket. Brackets are available for most models, as summarised on the previous page. (Note that Models CDD10, CDD12 and
CDD15 may also be wall or ceiling mounted using a yoke assembly – see page 11.)
All mounting brackets allow CDD enclosures to be mounted in either vertical ("portrait") or horizontal ("landscape") orientation.
See page 16 for important information regarding driver rotation for use in horizontal orientation.
The wall mounting brackets include pan and tilt adjustments to permit optimum alignment, while the ceiling brackets (CDD6 and
CDD8) allow vertical tilt angle to be set. To help installers complete a neat fitment, the fixing plate of all the brackets includes a
19 mm dia. cable access hole for the connection(s).
NOTE: To assist with first fix installation, mechanical drawings and drilling templates for all ceiling and wall mounting brackets
may be found in the Technical drawings section of this Guide, see page 57.

Model CDD5:

NOTE: Model CDD5 speakers are packed and shipped in pairs, complete with wall mounting brackets finished in either black or
white to match the speakers. (Note that CDD5s in custom RAL colours will be supplied with black brackets.) No additional
mounting hardware is required if the speakers are to be wall mounted.
Ceiling bracket – Part Nos. CDDCB5B (black), CDDCB5W (white):
Model CDD5 speakers may alternatively be ceiling mounted using these optional brackets, which mate with one part of the wall
mounting brackets supplied with the speakers.
CDD User Guide V1.0 10