CDD
USER GUIDE
YOKE ASSEMBLIES
Yoke assemblies are available for CDD Models CDD10, CDD12 and CDD15. In the case of the CDD15, a yoke assembly is the only
mounting bracket available.
For fixed installations, the yoke assembly must be installed horizontally, allowing tilt adjustment. Two fixing holes are provided
in the main strut for this purpose.
Alternatively, if the cabinet is to be suspended from a scaf pole or other standard rigging, the yoke may be fitted with a half-
coupler clamp using a third (centrally-located) 13 mm dia. hole in the yoke's main strut.
See page 13 for important information regarding driver rotation for use in horizontal orientation.
Note that the yoke assemblies for the CDD10 and CDD15 are identical in design to the yoke assembly for the CDD12; only that
for the CDD12 is pictured below.
Model CDD10:
Yoke Assembly CDDYA10B (black), CDDYA10W (white)
Model CDD12:
Yoke Assembly CDDYA12B (black), CDDYA12W (white)
Model CDD15:
Yoke Assembly CDDYA15B (black), CDDYA15W (white)
EYE BOLTS
All CDD Series models may be flown using optional eye bolts
Shouldered Eye bolts, Part No. HTKCT05 (8 mm dia.), HTKCT06 (10 mm dia.)
CDD User Guide V1.0
12