Martin Audio CDD Series User Manual page 27

CDD USER GUIDE
Next step is to attach the cabinet section of the bracket to the CDD. This is the bracket with four countersunk fixing holes on a
square pattern with the horizontal bolt in the curved slot.
The rear of the cabinet has six countersunk bolts fitted designed for use with the mounting brackets. For portrait mode remove
the lower 4 bolts, for landscape mode remove the middle four. Position the bracket over the required holes orientated to suit
the orientation that is being used and screw into place tightly using the bolts removed from the cabinet.
For horizontal (landscape) mode use the four holes closest to the middle and attach the bracket at right angles to the cabinet.
Note that CDD6 only has four fixing holes not the six on the CDD8, 10 and 12..
You are now ready to fit the speaker to the wall. Offer the speaker up to the bracket so you can hook horizontal bolt in the curved
slot onto the notch on the ball bracket. Make sure that you follow appropriate safety measures if you are working at height such
as using a scaffold tower or lifting platform which allows you to safely use both hands for this.
CDD User Guide V1.0 26