Table of Contents
Advertisement
CDD
USER GUIDE
The cabinet assembly can now be attached to the yoke. If the yoke has already been fitted to a wall or ceiling as part of a
permanent installation, this step should be undertaken by two people, for safety reasons: one to hold the cabinet in place and
the other to fit the securing bolts at either end. If the cabinet is to be suspended from a scaf pole with a clamp, it may be possible
to attach the yolk loop to the cabinet at ground level.
IMPORTANT INFORMATION
All standard safety protocols must be observed when working at height if the fixing point cannot be reached from the ground.
Note that each end of the yoke arms has three 10.5 mm holes, 17.5 mm apart. Any pair of holes may be used; the choice will be
determined only by the degree of vertical adjustment required and how close to the yoke frame the cabinet is preferred to be.
CDD User Guide V1.0
38
Advertisement
Table of Contents
