Martin Audio CDD Series User Manual page 26

CDD USER GUIDE
First fix:
The first step is to separate the two halves of the bracket. There are two horizontally mounted nut and bolts holding the two
halves together. The upper one which sits in a curved slot does NOT need to be removed. Unscrew the lower bolt and the cabinet
bracket will lift off the wall bracket
First fix is to secure the wall section of the bracket. This is the part with four mounting holes, a vertical bolt holding the section
which allows horizontal adjustment and the slot into which the cabinet bracket bolt sits. Use appropriate wall fixings suitable for
the composition of the wall. These must be of sufficient strength to support the weight of the speaker, 5.5Kg (6.6lbs) for the
CDD6, 9.5Kg (21lbs) for the CDD8, 15.3Kg (33.7lbs) for the CDD10 and 19.3Kg (42.5lbs) for the CDD12.
It is also good practice to terminate the speaker cables with the Phoenix connectors at this stage.
Second fix:
CDD User Guide V1.0 25