Table of Contents
Advertisement
CDD
USER GUIDE
CDD6 and CDD8
Optional mounting CDDCB6/8(B or W*) is a bracket onto which allows a CDD6 or CDD8 cabinet to be ceiling mounted. It consists
of two sections: a 90° arm and a removable four-point cabinet bracket section which is fixed directly to the cabinet rear:
* B and W suffixes denote colour
First fix:
First disassemble the bracket, unscrewing the cabinet section from the ceiling arm using an M6 hex key to undo the securing
bolt.
Fix the ceiling bracket assembly to the ceiling. There are three 6.5 mm holes and a central 13 mm hole in the bracket for this
purpose. It is essential that appropriate fixings are used to allow safe and secure attachment to the ceiling material, particularly
as these may be fitted overhead public areas. The fixings to be used will depend on the ceiling construction. Use the larger central
13 mm hole as the principal fixing initially: this lets you adjustment the bracket to obtain the correct horizontal coverage by
pivoting it on the single mounting. When the position is correct, tighten it, and add further fixings to the other three holes to
ensure a safe and secure mounting.
It is also good practice to terminate the speaker cables with the Phoenix connectors at this stage.
CDD User Guide V1.0
32
Advertisement
Table of Contents
