Table of Contents
Advertisement
Chapter 5
2. Go to
Wireless
>
Wireless Statistics
each client device connected to the router.
•
MAC Address
- The MAC address of the connected wireless client.
•
Current Status
- The running status of the connected wireless client.
•
Received Packets
- Packets received by the wireless client.
•
Sent Packets
- Packets sent by the wireless client.
•
Configure
- The button is used for loading the item to the Wireless MAC Filtering list.
•
Allow
- If the Wireless MAC Filtering function is enabled, click this button to
allow the client to access your network.
•
Deny
- If the Wireless MAC Filtering function is enabled, click this button to
deny the client to access your network.
5. 4. 7.
Throughput Monitor
1. Visit http://tplinkwifi.net, and log in with the default username and password:admin.
2. Go to
Wireless
>
Throughput Monitor
•
Rate
- The unit for the Throughput.
Configure the Router in Access Point Mode
to check the data packets sent and received by
to view the wireless throughput information.
82
Advertisement
Table of Contents
