Wireless Statistics; Throughput Monitor - TP-Link C50V5 User Manual

Chapter 5
• Enable Client Isolation
that wireless stations cannot access each other through WLAN. This function will be
disabled if WDS/Bridge is enabled.
• Enable WMM - WMM function can guarantee the packets with high-priority messages
being transmitted preferentially. It is strongly recommended to enable this function.
5. 6. 7.

Wireless Statistics

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Wireless >
each client device connected to the router.
• MAC Address - The MAC address of the connected wireless client.
• Current Status - The running status of the connected wireless client.
• Received Packets
• Sent Packets - Packets sent by the wireless client.
• SSID - SSID that the station associates with.
5. 6. 8.

Throughput Monitor

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Wireless >
- This function isolates all connected wireless stations so
Wireless Statistics
- Packets received by the wireless client.
Throughput Monitor
to check the data packets sent and received by
to watch wireless throughput info.
85