Chapter 5
5. 5. 3.
Address Reservation
You can reserve an IP address for a specific client. When you specify a reserved IP
address for a PC on the LAN, this PC will always receive the same IP address each time
when it accesses the DHCP server.
1. Visit http://tplinkwifi.net, and log in with the default username and password:admin.
2. Go to
DHCP
>
Address
3. Click
Add New
and fill in the blank.
1 ) Enter the MAC address (in XX-XX-XX-XX-XX-XX format.) of the client for which
you want to reserve an IP address.
2 ) Enter the IP address (in dotted-decimal notation) which you want to reserve for
the client.
3 ) Leave the
Status
4 ) Click Save.
5. 6.
System Tools
5. 6. 1.
LED Control
The LED control feature allows you to turn off or on the LEDs of the router automatically
when needed.
1. Visit http://tplinkwifi.net, and log in with the default username and password: admin.
2. Go to
System Tools
3. Tick
Night Mode
and select the
Save.
Reservation.
as Enabled.
>
LED
Control.
LED Off Time
Configure the Router in Access Point Mode
from the pull-down lists. Then click
85