Table of Contents
Advertisement
Chapter 6
¾
To backup configuration settings:
Click
Backup
to save a copy of the current settings in your local computer. A ".bin" file
of the current settings will be stored in your computer.
¾
To restore configuration settings:
1. Click
Choose File
to locate the backup configuration file stored in your computer, and
click Restore.
2. Wait a few minutes for the restoring and rebooting.
Note: During the restoring process, do not power off or reset the router.
6. 6. 8.
Reboot
1. Visit http://tplinkwifi.net, and log in with the default username and password:admin.
2. Go to
System Tools
Some settings of the router will take effect only after rebooting, including:
• Change the LAN IP Address (system will reboot automatically).
• Change the DHCP Settings.
• Change the Working Modes.
• Change the Web Management Port.
• Upgrade the firmware of the router (system will reboot automatically).
• Restore the router to its factory defaults (system will reboot automatically).
• Update the configuration with the file (system will reboot automatically).
6. 6. 9.
Password
1. Visit http://tplinkwifi.net, and log in with the default username and password:admin.
2. Go to
System Tools
and password of the router.
> Reboot, and you can restart your router.
> Password, and you can change the factory default username
Configure the Router in Repeater Mode
108
Advertisement
Table of Contents
