Table of Contents
Advertisement
Chapter 5
Some settings of the router will take effect only after rebooting, including:
• Change the LAN IP Address (system will reboot automatically).
• Change the DHCP Settings.
• Change the Working Modes.
• Change the Web Management Port.
• Upgrade the firmware of the router (system will reboot automatically).
• Restore the router to its factory defaults (system will reboot automatically).
• Update the configuration with the file (system will reboot automatically).
5. 6. 8.
Password
1. Visit http://tplinkwifi.net, and log in with the default username and password:admin.
2. Go to
System Tools
and password of the router.
It is strongly recommended that you change the default username and password of the
router, for all users that try to access the router's web-based utility or Quick Setup will
be prompted for the router's username and password.
Note:
The new username and password must not exceed 15 characters and not include any spacing.
3. Click Save.
5. 6. 9.
Language
1. Visit http://tplinkwifi.net, and log in with the default username and password: admin.
2. Go to
System Tools
3. Select the language you prefer from the pull-down list, and then click Save.
> Password, and you can change the factory default username
> Language, and you can view the logs of the router.
Configure the Router in Access Point Mode
90
Advertisement
Table of Contents
